How to Replace Cf500a Color Cartridge?

HP Color Laserjet M254dw laser printer with its small size, high resolution, is welcomed by the majority of users. When the printer is used for a period of time, the printed words will be blurred or incomplete, and you need to replace the new cf500a color cartridge sooner. Because of the printer's toner cartridge (that is, the cartridge is integrated with the cartridge) is a one-time consumable, many users put the old toner cartridge aside, replaced with a new toner cartridge, which Very uneconomical. In fact, when the toner runs out, you can continue to use after its supplement.

1. Remove the toner cartridge, toner cartridge with plastic structure, the appearance of the two parts, one part of the cf500a, the other part is the waste toner box, the middle is the cartridge, the cartridge has a cover outside the protection, the various parts of the card Ring connected

2. Place the toner cartridge on a clean desk. Use a flathead screwdriver to lift the plastic pins on both sides of the fixed cartridge cover and remove the cartridge cover (be careful not to lose the spring).

3. Use a screwdriver and pliers to remove the retaining ring on both sides of the toner cartridge, and carefully remove the toner cartridge. Be careful not to touch the surface, then use a piece of A4 paper to wind up the toner cartridge in a dark place (the toner cartridge will break the photosensitive coating).

4. Remove the cleaning roller and you will see a snap ring on the bottom of the waste toner box to connect the waste toner box with the toner cartridge. Push it out with a screwdriver and remove it with the pliers. Separate the waste toner box from the side of the toner cartridge and the other side with a large number of gears that can be separated (before this, do not remove the screws next to the toner cartridge). At the same time, throw away the waste toner collected in the waste toner box (be careful not to contaminate the toner cartridge when emptying it).

5. Remove the screws next to the toner cartridge (separate side), remove the fixing parts, and you can see a cover, open the cover, you can replenish the toner inside.

6. Follow the steps above the reverse process to install the compatible toner cartridges, with a balloon blower around the toner cartridge and gear on the clean, shake a few uniform, into the laser printer, run the self-test print program prints a few you're done.